Salt Requirements
The amount of Pool Pro Salt needed for your salt chlorinator depends on your specific model:
- Most chlorinators require 3500-7000ppm (0.35%-0.7%) salt concentration
- Pool Pro and Neptune chlorinators only need 3000ppm (0.3%)
- The Neptune NDC Chlorinator range is compatible with mineral salts
Always follow manufacturer recommendations to prevent damage and ensure proper chlorine production. You only need to add replacement salt to compensate for normal consumption, filter backwashing, splash-out, and rainfall overflow. Refer to the Salt Calculator table for guidance on how much salt to add.
Quality Assurance
While many salt chlorinator brands exist, Pool Pro and Neptune chlorinators offer high quality, reliable performance backed by professional support and service. Contact your Pool Pro Professional for advice on selecting the right size chlorinator for your pool.
SALT CALCULATOR*
Using 20kg bags of Pool Pro Salt
| TO RAISE SALT CONCENTRATION BY | 10,000L Water | 20,000L Water | 40,000L Water | 60,000L Water |
|---|---|---|---|---|
| 0.1% or 1000ppm | .5 Bag | 1.0 Bag | 1.9 Bags | 2.9 Bags |
| 0.2% or 2000ppm | 1.0 Bag | 2.0 Bags | 3.8 Bags | 5.8 Bags |
| 0.3% or 3000ppm | 1.5 Bags | 3.0 Bags | 5.8 Bags | 8.6 Bags |
| 0.4% or 4000ppm | 2 Bags | 4.0 Bags | 7.7 Bags | 11.5 Bags |
| 0.5% or 5000ppm | 2.4 Bags | 5.0 Bags | 9.6 Bags | 14.4 Bags |
| 0.6% or 6000ppm | 3.0 Bags | 6.0 Bags | 11.5 Bags | 17.3 Bags |
*This is a guide only. Different brands of chlorinators work on different levels of salt.
CHLORINATOR MAINTENANCE
In addition to standard Salt Chlorinators, we offer self cleaning chlorinators in both Pool Pro and Neptune brands. Although these chlorinators are almost maintenance-free, all chlorinators require cleaning periodically to remove calcium deposits which build up on the electrodes as a result of the electrolysis process. This cleaning is usually accomplished by soaking the electrodes in Pool Pro Salt Cell Cleaner. This product, unlike some available, is not Hydrochloric Acid based. Cleaning your cell with Hydrochloric Acid based cleaners decreases the life of your cell.
NB. The manufacturers’ instructions should be strictly adhered to regarding cleaning, to avoid damage to the assembly.
OTHER CHEMICAL REQUIREMENTS
The requirements for chemical balance are the same for salt pools as for traditionally chlorinated pools. Total Alkalinity, pH, Calcium Hardness and Chlorine levels should be checked regularly. Pool Pro Stabiliser (isocyanuric acid) should always be added to the pool and maintained at approx 30-50ppm, to reduce chlorine loss due to UV rays.
During periods of high bather loads or very hot weather, it may be necessary to manually supplement with Pool Pro Liquid Chlorine or Pool Pro Stabilised Chlorine to maintain correct levels. Regular super chlorination or shock dosing with Pool Pro Clean and Clear should be carried out.
WARNING: When using salt chlorinators with gas or electric heaters and heat pumps, care should be taken to ensure the production of chlorine is adjusted to suit the spa or pool, as the heater’s internal components can be damaged by excessive salt and/or chlorine levels. This is particularly important when operating for extended periods during heat-up. The cell is always placed after heaters.
